Rod Puppet Sculpting

Giddry

Giddry

New Member
Joined
Jan 11, 2010
Messages
1
Reaction score
0
Hi everyone! My name is Kristin. I'm a newbie to this forum but I've made several puppets already. They've all been different kinds and now I find myself in a situation where I need to make a few rod puppets and I have no idea how to sculpt a head.

Do I use plaster? Paper Mache? I don't know how to make it smooth because I'm used to putting fleece over it and these need to be sort of shiny and a little "wood" looking. Do you have any suggestions? I appreciate it in advance! :search:
 
practicecactus

practicecactus

Well-Known Member
Joined
Dec 5, 2004
Messages
396
Reaction score
4
Although I haven't tried it, I've got an old puppet making book that recommends a product called 'Plastic Wood'. Sculpting a head out of plastacine, covered with petrollium jelly so it doesn't stick, the plastic wood is applied thinly over it and left to harden, then cut a section out of the back to scoop out the plasticine and apply the mechanisms to nod or whatever. There must be a few products like that out there someone here could recommend.
 
SesameKermie

SesameKermie

Well-Known Member
Joined
Nov 3, 2004
Messages
271
Reaction score
2
I believe that you can also use a fine sandpaper on it to gently sand down paper-mache once it is completely dry. IIRC, you use the standard water-glue-flour flour mix and blank newsprint, chop your paper up really fine (a cross-cut paper shredder can help with this to save your hands) and then build your head. Once it is completely dry, use a fine grit sandpaper to gently sand and smooth it. Since the paper was chopped so fine, it should be fairly smooth to start with.

For wood grain effects, I recommend a faux-finish techique.
 
Teenager's

Teenager's

Well-Known Member
Joined
Oct 27, 2005
Messages
382
Reaction score
0
You might also consider using paper-clay. It's exactly what it sounds like....clay made out of paper, so you can sculpt it and it remains light. What works also is if you create a base or armature out of tin-foil and then cover that with paper clay making it even lighter. Like paper mache it can also be sanded with sand paper. The upside is that this material is really easy to work with and can be found at Michaels.

Interestingly enough though practicecactus....the material "plastic wood" is no longer produced because of its chemical properties. There is a current knock-off version, but I've heard from other puppet builders that it's not as strong or easy to work with as its predecessor.
 
L

lynxminx

Member
Joined
Jan 19, 2010
Messages
7
Reaction score
0
Giddry said:
Hi everyone! My name is Kristin. I'm a newbie to this forum but I've made several puppets already. They've all been different kinds and now I find myself in a situation where I need to make a few rod puppets and I have no idea how to sculpt a head.

Do I use plaster? Paper Mache? I don't know how to make it smooth because I'm used to putting fleece over it and these need to be sort of shiny and a little "wood" looking. Do you have any suggestions? I appreciate it in advance! :search:
Click to expand...
Apoxie-Sculpt would work, but it would be heavy. You could try laying it over a lighter armature...it'll bond permanently to any material. There's another product by the same company that I haven't tried yet...it's more like a clay, but dries like a plastic putty, called Critter Clay (for taxidermists). Both can be sanded, drilled, etc.

Whatever material you choose, you can get a glossy wood-like shine from it by spraying on a couple topcoats of clear acrylic.
 
TheCreatureWork

TheCreatureWork

Well-Known Member
Joined
Mar 1, 2006
Messages
544
Reaction score
39
You must log in or register to reply here.
Top