The other thing is that the backdrop is just a projection screen pulled down so it doesn't allow for to much of a wider shot. If you have a solution for this please help.
Hi Jon
I had a feeling you might be dealing with a limitation like that. Projector screens aren't too wide, so that will be a challenge, but here are a couple things you can try to help loosen up your framing a bit:
Move the camera as far away from the screen as you can and then zoom in until the screen's edges are barely cropped off. You might be able to do some camera tests to see if the viewfinder or LCD on the camera is showing more or less than you're actually getting on the tape. They are rarely setup to show 100 percent of the coverage and will often crop a bit off. This means that you can set the zoom using the LCD and then when you look at the footage on the computer, you will end up having a bit more in the frame than you intended to show.
Once you get the lens zoomed where you need it, position the camera on the tripod so that the lens height is about even with your elbow, and then tilt the tripod head up slightly (but don't show the top edge of the backdrop) to focus the lens toward the eye line of your puppets. This upward tilt will be more pronounced when you are working with wider lenses and the performers are closer to the camera, but even on longer lens shots (like the one you are setting up here to avoid the small backdrop issues) a small amount of upward lens tilt will help you maintain a more natural hand position, and it's accompanying eye focus, while performing. Whether you stand or kneel to perform in this scenerio, the overall height of the tripod should be adjusted to get the camera height and the elbow and the lens focus at the eyes.
Now you just put the performers closer to the backdrop than you are probably used to being to get the looser composition needed for the videos. To avoid shadows on the backdrop, you'll want to be as close to the camera as you can get while still keeping the composition where it needs to be, and have the main lights set at a high angle pointing down towards the puppets, so any shadow will throw below the sight line of the camera lens. If shadows persist where you don't want them, just try to raise the ambient light of the entire room to more closely match the key light. This will be flatter lighting, but better than pesky shadows where you don't want them. It won't be perfect, but hopefully this solution will help you in your small studio.
If you don't have the space to move the camera back enough, to make this setup work as described, then maybe you can stretch a wider (and taller if possible) backdrop in front of the projector screen. A couple backdrop stands with cross bar and a 9 foot wide muslin or similar will offer you the flexibility of shooting with a wider lens setting.
And just as an aside, I wouldn't try to do any kind of chroma key work (if you were even thinking of doing that) until you have more space to work with. Lighting the backdrop evenly is really important with that sort of thing and if you have limited space, you won't be able to light the backdrop without having your puppets throwing some shadows where you don't want them, which will make those areas harder to key out.
Hopefully my descriptions made sense... please let me know if any of this needs clarification.