• Welcome to the Muppet Central Forum!
    You are viewing our forum as a guest. Join our free community to post topics and start private conversations. Please contact us if you need help.
  • Christmas Music
    Our 24th annual Christmas Music Merrython is underway on Muppet Central Radio. Listen to the best Muppet Christmas music of all-time through December 25.
  • Macy's Thanksgiving Parade
    Let us know your thoughts on the Sesame Street appearance at the annual Macy's Parade.
  • Jim Henson Idea Man
    Remember the life. Honor the legacy. Inspire your soul. The new Jim Henson documentary "Idea Man" is now streaming exclusively on Disney+.
  • Back to the Rock Season 2
    Fraggle Rock Back to the Rock Season 2 has premiered on AppleTV+. Watch the anticipated new season and let us know your thoughts.
  • Bear arrives on Disney+
    The beloved series has been off the air for the past 15 years. Now all four seasons are finally available for a whole new generation.
  • Sam and Friends Book
    Read our review of the long-awaited book, "Sam and Friends - The Story of Jim Henson's First Television Show" by Muppet Historian Craig Shemin.

Heat Shrink Tubing

staceyrebecca

Well-Known Member
Joined
Jul 24, 2007
Messages
698
Reaction score
26
I was at the hardware store (good ole Home Depot, not a tiny place..) & went a-looking for heat-shrink tubing to heat and shrink over arm rods & whatever else gets in my way. They had a small variety package of different diameters, but they were no more than 3" long apiece. I asked the guy with the home depot apron & mardi gras mask where I'd find it...he said that's all they carry.

So my question to you is, where do you find it, & if I buy it, what's a good "general" size to get (for the purpose of shrinking around arm rods & various other things that get in my way)?
 

Blink

Well-Known Member
Joined
Jul 16, 2002
Messages
511
Reaction score
2
Hey staceyrebecca,

I actually just picked some up yesterday. You won't find what you need at any of the big stores (all they carry are the precut small lengths). You need to go to an electrical store. They sell it by the package/roll. Just check your local electrical stores and they should have it. Good luck.
 

MGov

Well-Known Member
Joined
Sep 7, 2005
Messages
566
Reaction score
0
Hi Staceyrebecca!

Yeah, what Blink said.

Also try Plasti-dip:

http://www.plastidip.com/index.php

I switched from the tubing to Plasti-Dip because it didn't require me to sit there with the hair dryer.

Also wanted to post on your thread to make your e-mail go "bing!"
 

staceyrebecca

Well-Known Member
Joined
Jul 24, 2007
Messages
698
Reaction score
26
Thank you for the bing, mgov. :wink:

Mgov, did you ever try a heat gun as opposed to a hair dryer?
 

MGov

Well-Known Member
Joined
Sep 7, 2005
Messages
566
Reaction score
0
I didn't have access to a heat gun at the time I was using the tubes.


BING!
 

Buck-Beaver

Well-Known Member
Joined
Apr 16, 2002
Messages
4,174
Reaction score
162
Heat shrink tubing is one of those things that if you have an electronics/hardware surplus store in your area it's worth checking there for too because you'll sometimes find it incredibly cheap.
 

staceyrebecca

Well-Known Member
Joined
Jul 24, 2007
Messages
698
Reaction score
26
Bing indeed.

I'm wondering then, Mr Plasti-dip, how long does it take to dry?

I've actually been seeing the heat-shrink "around" for awhile & liked shrinky dinks as a child..so I thought that would be my best option.
 

Teenager's

Well-Known Member
Joined
Oct 27, 2005
Messages
382
Reaction score
0
You can also use a hair dryer to speed up the drying process--It takes somewhere around :30 minutes before you can handle it. (unless it's a thin layer. I usually pour the stuff on) --but after that & I have it positioned where I want it I also let it sit overnight.
 

staceyrebecca

Well-Known Member
Joined
Jul 24, 2007
Messages
698
Reaction score
26
You can also use a hair dryer to speed up the drying process--It takes somewhere around :30 minutes before you can handle it. (unless it's a thin layer. I usually pour the stuff on) --but after that & I have it positioned where I want it I also let it sit overnight.
I assume you're speaking of the dipping stuff...
 
Top