• Welcome to the Muppet Central Forum!
    You are viewing our forum as a guest. Join our free community to post topics and start private conversations. Please contact us if you need help.
  • Sesame Street Season 55
    Sesame Street Season 55 has premiered on Max with new episodes each Thursday. Watch and let us know your thoughts.
  • Jim Henson Idea Man
    Remember the life. Honor the legacy. Inspire your soul. The new Jim Henson documentary "Idea Man" is now streaming exclusively on Disney+.
  • Back to the Rock Season 2
    Fraggle Rock Back to the Rock Season 2 has premiered on AppleTV+. Watch the anticipated new season and let us know your thoughts.
  • Bear arrives on Disney+
    The beloved series has been off the air for the past 15 years. Now all four seasons are finally available for a whole new generation.
  • Sam and Friends Book
    Read our review of the long-awaited book, "Sam and Friends - The Story of Jim Henson's First Television Show" by Muppet Historian Craig Shemin.

Moving Eyes Mechanism work in progress

practicecactus

Well-Known Member
Joined
Dec 5, 2004
Messages
396
Reaction score
4
Thought I'd link this here because you can still kinda see things working, at this stage, before I add the eyeblink, which will obscure some things from view.

See it here on my Puppethub.

I really wanted to add an eyebrow movement, but making this as small and tight as possible, I didn't leave myself much room, the way I wanted to operate the eyebrows and have them move. Maybe one day , when I make it all bigger. Moving eyes with a blink should be plenty of character for a puppet anyway.
 

Puppetainer

Well-Known Member
Joined
Jun 3, 2005
Messages
230
Reaction score
6
Dude. I wanted to take a stab at moving and blinking eyes. I ended up just going with blinking eyes and actually my first pass at those didn't end too well either. Worked well until actually installed into the puppet. Now it's sort of like the puppet had a stroke. Only one eye closes and not all the way. I'm sure I'll have another go at them but after looking at your VERY impressive and rather elaborate mechanism I may hold off a bit. Need to work myself back up to something that ambitious.

This is my rather long winded way of saying, "Amazing work! Great job!"
:big_grin:
 

practicecactus

Well-Known Member
Joined
Dec 5, 2004
Messages
396
Reaction score
4
Cheers guys.
I should point out it is very slow going, and have redone every part on it at least once.
Currently looking for tubing to run the wire cable down to a control joystick as the one I bought isn't gonna cut the mustard.
 

Puppetainer

Well-Known Member
Joined
Jun 3, 2005
Messages
230
Reaction score
6
You can get some very soft and flexible tubing for pretty cheap at your local pet store. In the fish aquarium supplies they sell rolls of it for about $3.00 I've used it for a variety of things. If you're looking for something a little more solid you can find some good plastic tubing in the plumbing section of Home Depot for fairly cheap as well. Good luck!
 

Knucklehead

Well-Known Member
Joined
Sep 21, 2010
Messages
62
Reaction score
2
Right on!

Thanks so much for sharing ! that's what it's all about...
can you provide a breakdown of what kind of parts were used ?
did you cannibalize something .. A RC car?
 

practicecactus

Well-Known Member
Joined
Dec 5, 2004
Messages
396
Reaction score
4
Fraid not. All the parts are scratch built. You'd have to ask the animatronic pros where to get all those proper little fittings and pieces.
 
Top